Vulnerability Scan Result

Vulnerability description

Risk description

The risk is that an attacker could search for an appropriate exploit (or create one himself) for any of these vulnerabilities and use it to attack the system. Since the vulnerabilities were discovered using only version-based testing, the risk level for this finding will not exceed 'high' severity. Critical risks will be assigned to vulnerabilities identified through accurate active testing methods.

Recommendation

In order to eliminate the risk of these vulnerabilities, we recommend you check the installed software version and upgrade to the latest version.

Vulnerability description

Risk description

The risk is that lack of this header permits an attacker to force a victim user to initiate a clear-text HTTP connection to the server, thus opening the possibility to eavesdrop on the network traffic and extract sensitive information (e.g. session cookies).

Recommendation

The Strict-Transport-Security HTTP header should be sent with each HTTPS response. The syntax is as follows: `Strict-Transport-Security: max-age=<seconds>[; includeSubDomains]` The parameter `max-age` gives the time frame for requirement of HTTPS in seconds and should be chosen quite high, e.g. several months. A value below 7776000 is considered as too low by this scanner check. The flag `includeSubDomains` defines that the policy applies also for sub domains of the sender of the response.

Vulnerability description

Risk description

The risk is that if a user visits a web page (e.g. "http://example.com/pricing/") and clicks on a link from that page going to e.g. "https://www.google.com", the browser will send to Google the full originating URL in the `Referer` header, assuming the Referrer-Policy header is not set. The originating URL could be considered sensitive information and it could be used for user tracking.

Recommendation

The Referrer-Policy header should be configured on the server side to avoid user tracking and inadvertent information leakage. The value `no-referrer` of this header instructs the browser to omit the Referer header entirely.

Vulnerability description

Risk description

The risk is that if the target application is vulnerable to XSS, lack of this header makes it easily exploitable by attackers.

Recommendation

Configure the Content-Security-Header to be sent with each HTTP response in order to apply the specific policies needed by the application.

Vulnerability description

Risk description

The risk is that an attacker could use this information to mount specific attacks against the identified software type and version.

Recommendation

We recommend you to eliminate the information which permits the identification of software platform, technology, server and operating system: HTTP server headers, HTML meta information, etc.

Vulnerability description

Risk description

There is no particular security risk in having a robots.txt file. However, it's important to note that adding endpoints in it should not be considered a security measure, as this file can be directly accessed and read by anyone.

Recommendation

We recommend you to manually review the entries from robots.txt and remove the ones which lead to sensitive locations in the website (ex. administration panels, configuration files, etc).

Vulnerability description

Risk description

The risk is that lack of this header could make possible attacks such as Cross-Site Scripting or phishing in Internet Explorer browsers.

Recommendation

We recommend setting the X-Content-Type-Options header such as `X-Content-Type-Options: nosniff`.

Vulnerability description

Risk description

The risk is that exposed email addresses within the application could be accessed by unauthorized parties. This could lead to privacy violations, spam, phishing attacks, or other forms of misuse.

Recommendation

Compartmentalize the application to have 'safe' areas where trust boundaries can be unambiguously drawn. Do not allow email addresses to go outside of the trust boundary, and always be careful when interfacing with a compartment outside of the safe area.

Vulnerability description

Risk description

There is no particular risk in not having a security.txt file for your server. However, this file is important because it offers a designated channel for reporting vulnerabilities and security issues.

Recommendation

We recommend you to implement the security.txt file according to the standard, in order to allow researchers or users report any security issues they find, improving the defensive mechanisms of your server.

Vulnerability description

Risk description

These vulnerabilities expose the affected applications to the risk of unauthorized access to confidential data and possibly to denial of service attacks. An attacker could search for an appropriate exploit (or create one) for any of these vulnerabilities and use it to attack the system. Notes: - The vulnerabilities are identified based on the server's version.; - Only the first 5 vulnerabilities with the highest risk are shown for each port.; Since the vulnerabilities were discovered using only version-based testing, the risk level for this finding will not exceed "high" severity. Critical risks will be assigned to vulnerabilities identified through accurate active testing methods.

Recommendation

We recommend you to upgrade the affected software to the latest version in order to eliminate the risks imposed by these vulnerabilities.

Vulnerability description

Risk description

When the DMARC record is configured with sp=none, subdomains are not subject to DMARC enforcement, allowing attackers to spoof emails from subdomains without being blocked. This creates a significant risk of phishing and impersonation attacks, where malicious emails appear to originate from trusted subdomains. These spoofed emails can be used to deceive users or damage the organization's reputation, undermining the security benefits of DMARC for the primary domain.

Recommendation

To mitigate the risk, we recommend that the subdomain policy should be updated to sp=reject to ensure that any email failing DMARC checks from subdomains is automatically rejected. This will help prevent unauthorized emails from being sent from subdomains, reducing the risk of spoofing and phishing. Additionally, it's important to regularly monitor DMARC reports to track email activity from subdomains and adjust policies as needed to maintain consistent security across the entire domain.

Vulnerability description

Risk description

Without forensic reports (ruf), domain owners have limited visibility into the specifics of failed DMARC validation. This means potential malicious activity, such as email spoofing or phishing attempts, might go unnoticed until they result in more significant security breaches or reputational damage. Forensic reports allow for quick response to email abuses by providing detailed information about the failure, including the header information of the emails involved. The absence of this data hampers an organization's ability to identify and mitigate threats targeting its domain, increasing the risk of ongoing spoofing and fraud.

Recommendation

We recommend configuring the ruf tag in the DMARC record. This tag specifies where forensic reports should be sent, providing the domain owner with detailed data on DMARC validation failures. Forensic reports allow administrators to analyze why certain emails failed authentication, making it easier to fine-tune DMARC policies or address potential vulnerabilities. Ensure that the ruf email address belongs to a secure and trusted location capable of handling sensitive email data.

Vulnerability description

Risk description

The primary risk of using a DKIM key with fewer than 1024 bits is that it weakens the domain's email authentication security, making it more susceptible to brute-force attacks. If an attacker successfully forges a DKIM signature, they can impersonate legitimate senders and send fraudulent or phishing emails that appear authentic to the recipient. This can lead to financial losses, reputational damage, and an increased risk of targeted attacks, as recipients are more likely to trust emails that pass DKIM verification.

Recommendation

We recommend using a DKIM key with a length of at least 1024 bits. Ideally, 2048-bit keys should be used, as they provide a higher level of security and are more resistant to brute-force attacks. Organizations should regularly audit their DKIM configurations and rotate cryptographic keys periodically to maintain security. In addition, any DKIM keys that are less than 1024 bits should be immediately replaced with stronger keys to prevent exploitation.

Vulnerability description

Risk description

Exposing this service online can enable attackers to conduct man-in-the-middle attacks, thereby gaining access to sensitive user credentials and the contents of emails. Given that POP3 operates via a plaintext protocol, the entirety of the data exchanged between the client and server is left unencrypted. This critical information could then be leveraged in further attacks on the organization's network.

Recommendation

We recommend turning off POP3 access over the Internet and instead using a Virtual Private Network (VPN) that mandates two-factor authentication (2FA). If the POP3 service is essential for business purposes, we recommend limiting access only from designated IP addresses using a firewall. Furthermore, activating STARTTLS capability (switching the connection to a secure communication) or utilizing Secure POP3 (POP3S) is recommended, as this protocol employs encryption.

Vulnerability description

Risk description

The absence of rua reporting creates a significant blind spot in the domain's email security posture. Without aggregate reports, domain administrators cannot track DMARC compliance across email sent from their domain, leaving them unaware of potential misconfigurations or unauthorized use of their domain for malicious purposes, such as phishing or spoofing. This lack of visibility increases the risk of undetected spoofing attempts, which could damage the domain's reputation and lead to financial, operational, or reputational harm. Moreover, legitimate email issues, such as misaligned SPF or DKIM configurations, may also go unnoticed, affecting email deliverability.

Recommendation

We recommend configuring the rua tag in the DMARC record to receive aggregate reports from mail servers. This tag should point to a reliable email address or monitoring service capable of handling DMARC aggregate reports, such as rua=mailto:dmarc-reports@example.com. These reports provide valuable insights into how email from the domain is being treated by receiving mail servers, highlighting potential authentication issues and attempts to spoof the domain. Regularly reviewing these reports will help ensure the DMARC policy is properly enforced and that any email authentication failures are addressed in a timely manner.

Vulnerability description

Risk description

Exposing this service online can enable attackers to execute man-in-the-middle attacks, capturing sensitive user credentials and the contents of files because FTP operates without encryption. The entirety of the communication between the client and the server remains unsecured in plaintext. This acquired information could further facilitate additional attacks within the network.

Recommendation

We recommend turning off FTP access over the Internet and instead using a Virtual Private Network (VPN) that mandates two-factor authentication (2FA). If the FTP service is essential for business purposes, we recommend limiting access only from designated IP addresses using a firewall. Furthermore, utilizing SFTP (Secure File Transfer Protocol) is recommended as this protocol employs encryption to secure data transfers.

Vulnerability description

Risk description

Emails that fail DMARC checks are still delivered to recipients. This leaves the domain highly vulnerable to email spoofing and phishing attacks, as malicious actors can impersonate the domain without facing any consequences from DMARC enforcement.

Recommendation

We recommend changing the DMARC policy to p=quarantine or, ideally, p=reject to actively block or quarantine emails that fail DMARC validation. This will enhance the security of your domain against spoofing and phishing attacks by ensuring that only legitimate emails are delivered.

Vulnerability description

Risk description

The ~all directive in an SPF record allows unauthorized emails to pass through some email servers, even though they fail SPF verification. While such emails may be marked as suspicious or placed into a spam folder, not all mail servers handle soft fail conditions consistently. This creates a risk that malicious actors can spoof the domain to send phishing emails or other fraudulent communications, potentially causing damage to the organization's reputation and leading to successful social engineering attacks.

Recommendation

We recommend changing the SPF record's ~all (soft fail) directive to -all (hard fail). The -all setting tells recipient mail servers to reject emails from any IP addresses not listed in the SPF record, providing stronger protection against email spoofing. Ensure that all legitimate IP addresses and services that send emails on behalf of your domain are properly included in the SPF record before implementing this change.

Vulnerability description

Risk description

Exposing this service online can enable attackers to conduct man-in-the-middle attacks, thereby gaining access to sensitive user credentials and the contents of emails. Given that POP3 operates via a plaintext protocol, the entirety of the data exchanged between the client and server is left unencrypted. This critical information could then be leveraged in further attacks on the organization's network.

Recommendation

We recommend turning off POP3 access over the Internet and instead using a Virtual Private Network (VPN) that mandates two-factor authentication (2FA). If the POP3 service is essential for business purposes, we recommend limiting access only from designated IP addresses using a firewall. Furthermore, activating STARTTLS capability (switching the connection to a secure communication) or utilizing Secure POP3 (POP3S) is recommended, as this protocol employs encryption.

Vulnerability description

Vulnerability description

Risk description

The risk is that an attacker could use this information to mount specific attacks against the identified software type and version.

Recommendation

We recommend you to eliminate the information which permits the identification of software platform, technology, server and operating system: HTTP server headers, HTML meta information, etc.

Risk description

An initial step for an attacker aiming to learn about an organization involves conducting searches on its domain names to uncover DNS records associated with the organization. This strategy aims to amass comprehensive insights into the target domain, enabling the attacker to outline the organization's external digital landscape. This gathered intelligence may subsequently serve as a foundation for launching attacks, including those based on social engineering techniques. DNS records pointing to services or servers that are no longer in use can provide an attacker with an easy entry point into the network.

Recommendation

We recommend reviewing all DNS records associated with the domain and identifying and removing unused or obsolete records.

Vulnerability description

Risk description

The risk is that an attacker could use this information to mount specific attacks against the identified software type and version.

Recommendation

We recommend you to eliminate the information which permits the identification of software platform, technology, server and operating system: HTTP server headers, HTML meta information, etc.

Vulnerability description

Risk description

The risk is that an attacker could use this information to mount specific attacks against the identified software type and version.

Recommendation

We recommend you to eliminate the information which permits the identification of software platform, technology, server and operating system: HTTP server headers, HTML meta information, etc.